Centring clamp hexagon steel hardened and black oxid finish 03158-0201503
- Positive down force
- Suitable for clamping castings
- Self-centring
- Body hardened
- Low height
Unidad de venta
€378.15
más IVA.
Se ha añadido a su cesta de la compra
Designation
Centring clamp
Version 1
hexagon
Form
B
Main
material
steel
Surface finish
body
hardened and black oxid finish
Component
material
steel
Surface finish
component
hardened and ground
D=Diameter min.
14,5
D=max. diameter
18,5
A
4,5
Application
machined
Clamping
force
max. kN
3,5
Clamping type
internal clamping
D1
M6
D2
12
D3
2
D4
M3
H
17,3
H1
14,5
H2
9,8
H3
8,6
H4
1,4
K
4
L
5,5
L1
14,1
L2
12
M
2,5
No. of
hex
3
SW
5,5
Steel code
1.2842
Tightening
torque
max. Nm
2
UNSPSC Code
31162800
hexagon
4
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descripción
Material
Body 1.2842.
Ball and hex segments 1.4112.
Tension spring 1.4310.
Ball and hex segments 1.4112.
Tension spring 1.4310.
Version
Body hardened and black oxidised.
Ball and hex segments hardened and ground.
Ball and hex segments hardened and ground.
Note
Form B: With hexagons for sensitive hole surfaces.
Technical Data
Repetitive accuracy ±0.025
Concentric accuracy ±0.05
Concentric accuracy ±0.05
Application
For centre positioning and clamping in blind holes. Operated from below, manual or automatic using pneumatics or hydraulics.
Advantages
- Precise self-centring.
- Distortion free clamping.
- Large spread range.
- Low overall height.
- Positive down force.
- Distortion free clamping.
- Large spread range.
- Low overall height.
- Positive down force.
Drawing reference
Form A:
With balls for holes where light marking is acceptable.
Form B:
With hexagons for sensitive hole surfaces.
1) Mounting aid:
pin to accurately position the mandrel segments.
With balls for holes where light marking is acceptable.
Form B:
With hexagons for sensitive hole surfaces.
1) Mounting aid:
pin to accurately position the mandrel segments.
Nota importante sobre la descarga de modelos CAD
Para descargar nuestros modelos CAD, primero debe iniciar sesión. Si aún no ha creado una cuenta, regístrese en "Mi cuenta" (parte derecha de la pantalla) y siga las instrucciones.
Other customers also bought
