Atuador linear com acionamento por correias dentadas alumínio 20300-1080X1000
- Absorption of very high forces from all directions
- Optimum cycle for the movement of large masses
- Toothed belts enable high power transmission with alternating loads
- Good positioning accuracy
- Hollow shafts enable variable motor arrangements
Unidade de venda
€1,810.88
+ o ICMS alemão
Adicionado ao seu carrinho de compras
Denominação
Atuador linear
Versão 1
com acionamento por correias dentadas
Material
do corpo
básico
alumínio
L=Comprimento
1460
A
80
Aceleração máx:
m/s²
50
B
30
Carga útil
típica
kg
50
Constante
de avanço
mm/rev
146
Curso
S
1000
D
24
D1
76
D4
M6
D5
10
D6
M8
D7
13
E1
8
E2
20
E3
4,5
E4
12,25
Fx
N
1572
Fy
dinâmico
N
3662
Fz
dinâmico
N
3662
L1
240
L2
60
L3
40
L4
45
Largura
de
ranhura
8
Mx
dinâmico
Nm
27
My
dinâmico
Nm
146
Mz
dinâmico
Nm
146
Peso
curso 0
kg
5,33
Peso do
carro móvel
kg
0,87
Peso por
curso de 1000 mm
kg
8,39
Repetibilidade
±0,05
Sensor de proximidade
adequado
20905-015
Tamanho
80
Tipo da
correia
dentada
50AT5
Torque
Nm
0,7
Torque de
acionamento máx. M
Nm
38
Velocidade
máx.
m/s
5
~ CONFLICT MINERALS 3TG status
not yet identified
~ CP65 substance 1 cancer & reproductive toxicity
lead and lead compounds
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ REACh SVHC 2 name > threshold
previous lead possible
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descrição
Material
Body, extruded aluminium section.
Bearing housing and slide, aluminium.
Profile guide rail and guide carriage, steel.
Toothed belt, polyurethane with steel cord reinforcement.
Bearing housing and slide, aluminium.
Profile guide rail and guide carriage, steel.
Toothed belt, polyurethane with steel cord reinforcement.
Version
Body natural colour anodised
Bearing housing and slide, black anodised.
Tracks of the profile guide rail, inductively hardened and ground.
Bearing housing and slide, black anodised.
Tracks of the profile guide rail, inductively hardened and ground.
Note
Compact and flexible linear actuators with toothed belt drive. The body consists of a self-supporting aluminium extruded section with integrated profile guide rail. This rail system is able to absorb highest forces from all directions, is low-wear, and is optimised for moving large masses.
Slots are located on the outer sides of the aluminium profile, ensuring easy, reliable assembly and enabling accessories mounted. Proximity switches can be positioned and fastened in the upper T-slot. The aluminium profile is fully compatible with our standard I series profiles.
The steel cord reinforced toothed belt enables high power transmission with alternating loads, and simultaneously ensures excellent positioning accuracy with low wear and very little noise generation. The toothed belt runs on the upper side of the aluminium profile in guide slots, thus protecting all parts housed within the profile from dirt.
With its symmetrical design, the linear actuator enables motors and transmissions to be attached to all four sides of the bearing housing. The open ends of the unused hollow shafts on the bearing housing can be sealed using the optional protective caps 20300.
An additional centring hole is located on each tapped hole on the upper side of the slide. Other connecting elements can be precisely mounted on the slide in combination with the centring rings 20240.
Load specifications apply for dynamic loading.
Slots are located on the outer sides of the aluminium profile, ensuring easy, reliable assembly and enabling accessories mounted. Proximity switches can be positioned and fastened in the upper T-slot. The aluminium profile is fully compatible with our standard I series profiles.
The steel cord reinforced toothed belt enables high power transmission with alternating loads, and simultaneously ensures excellent positioning accuracy with low wear and very little noise generation. The toothed belt runs on the upper side of the aluminium profile in guide slots, thus protecting all parts housed within the profile from dirt.
With its symmetrical design, the linear actuator enables motors and transmissions to be attached to all four sides of the bearing housing. The open ends of the unused hollow shafts on the bearing housing can be sealed using the optional protective caps 20300.
An additional centring hole is located on each tapped hole on the upper side of the slide. Other connecting elements can be precisely mounted on the slide in combination with the centring rings 20240.
Load specifications apply for dynamic loading.
Technical Data
Safety rating IP50.
Temperature range
-20 °C - +70 °C.
On request
Other lengths (travel S max. 4000 mm).
Accessory
Protective caps. Slot table, motor adapter kit, synchronisation set and proximity switch, see table.
Nota importante sobre o descarregamento de modelos CAD
Para descarregar os nossos modelos CAD, é necessário iniciar sessão primeiro. Se ainda não criou uma conta, por favor registe-se em "A minha conta" (lado direito do ecrã) e siga as instruções.
Other customers also bought
