Telescopic rail Over extension steel galvanised 21335-06-0790
- Over extension
- Smooth running
- High lateral stability with exact guidance
Unidade de venda
€299.23 / unidade
+ o ICMS alemão
Adicionado ao seu carrinho de compras
Denominação
Trilho telescópico
Versão 1
Extensão excedente
Tipo de
produto
padrão
Material
do corpo
básico
aço
Superfície
Corpo básico
zincada
Material
dos componentes
aço
Superfície
Componentes
peça endurecida
B=Largura
38,2
H=Altura
53,1
L=Comprimento
790
A
26
A1
352
A2
384
A4
672
A5
704
A6
320
A7
384
Capacidade de carga
por par
kg
100
Curso
S
1206
Código do artigo do fabricante
DZ5351-0080
Montagem
Montagem lateral
Tipo de embalagem
1 peça = 1 par
UNSPSC Code
31171514
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descrição
Material
Slides steel.
Ball cages steel.
Balls, steel.
Ball cages steel.
Balls, steel.
Version
Slides galvanised.
Ball cages, galvanised.
Balls hardened.
Ball cages, galvanised.
Balls hardened.
Note for ordering
Sold in pairs.
Note
On telescopic slides with over-extension, the travel is greater than the installed length.
The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacities stated were determined for a rail spacing of 450 mm and refer to the maximum value after 20,000 cycles.
These telescopic slides are not suitable for horizontal installation.
The installation clearance between the cabinet and the drawer should be between +0.2 mm and +0.5 mm for a rail thickness of 38.2 mm.
It is recommended that the telescopic slides be secured using M5 countersunk screws.
The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacities stated were determined for a rail spacing of 450 mm and refer to the maximum value after 20,000 cycles.
These telescopic slides are not suitable for horizontal installation.
The installation clearance between the cabinet and the drawer should be between +0.2 mm and +0.5 mm for a rail thickness of 38.2 mm.
It is recommended that the telescopic slides be secured using M5 countersunk screws.
Temperature range
-20 °C to +70 °C.
Nota importante sobre o descarregamento de modelos CAD
Para descarregar os nossos modelos CAD, é necessário iniciar sessão primeiro. Se ainda não criou uma conta, por favor registe-se em "A minha conta" (lado direito do ecrã) e siga as instruções.
Other customers also bought
