Telescopic rail Full extension both sides aluminium silver anodised 21335-23-0400
- For heavy duty use
- Smooth running
Unidade de venda
€420.77 / unidade
+ o ICMS alemão
Adicionado ao seu carrinho de compras
Denominação
Trilho telescópico
Versão 1
Extensão total em ambos os lados
Tipo de
produto
padrão
Material
do corpo
básico
alumínio
Superfície
Corpo básico
anodizado
Cor
do corpo
básico
prata
Material
dos componentes
aço inoxidável
B=Largura
26,5
H=Altura
80
L=Comprimento
400
A
385
A1
117,5
A2
75
Capacidade de carga
por par
kg
210
Curso
S
400
Código do artigo do fabricante
DA4165-0040
L1
422
Montagem
Montagem lateral
Tipo de embalagem
1 peça = 1 par
UNSPSC Code
31171514
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descrição
Material
Rails aluminum.
Ball cage and balls steel.
Ball cage and balls steel.
Note for ordering
Sold in pairs.
Note
By telescopic slides with full extension both sides, the travel is roughly equal to the installation length. This ensures greater comfort and accessibility. The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load-bearing capacities stated were determined for a rail spacing of 600 mm.
To ensure the best possible mounting, all fastening points should be used.
These slides are not suitable for horizontal installation.
A system re-lubrication with high-pressure grease is recommended after 2,000 cycles.
The end stops were tested at the specified load capacity over ten cycles at an impact speed of 0.8 m/s. External end plates are also recommended.
To ensure the best possible mounting, all fastening points should be used.
These slides are not suitable for horizontal installation.
A system re-lubrication with high-pressure grease is recommended after 2,000 cycles.
The end stops were tested at the specified load capacity over ten cycles at an impact speed of 0.8 m/s. External end plates are also recommended.
Temperature range
-20 °C to +70 °C.
Nota importante sobre o descarregamento de modelos CAD
Para descarregar os nossos modelos CAD, é necessário iniciar sessão primeiro. Se ainda não criou uma conta, por favor registe-se em "A minha conta" (lado direito do ecrã) e siga as instruções.
Other customers also bought
