Telescopic rail Partial extension stainless steel bright 21334-50-0400
- Latches in closed position
- Suitable for flat mounting
- Smooth running
Unidade de venda
€77.64 / unidade
+ o ICMS alemão
Adicionado ao seu carrinho de compras
Denominação
Trilho telescópico
Versão 1
Extensão parcial
Tipo de
produto
padrão
Material
do corpo
básico
aço inoxidável
Superfície
Corpo básico
superfície sem tratamento
B=Largura
9,5
H=Altura
35,34
L=Comprimento
400
A
22
A1
32
A2
160
A3
192
A4
320
A5
352
A6
160
A7
192
A8
21,5
Capacidade de carga
por par
(80.000 ciclos) kg
54
Capacidade de carga por par
(10.000 ciclos) kg
59
Curso
S
282
Código do artigo do fabricante
DS2028-0040
Montagem
Montagem lateral
Tipo de embalagem
1 peça = 1 par
UNSPSC Code
31171514
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descrição
Material
Slides stainless steel 1.4301.
Ball cage stainless steel 1.4301.
Balls stainless steel 1.4034.
Version
Slides bright.
Ball cages bright.
Balls bright.
Ball cages bright.
Balls bright.
Note for ordering
Sold in pairs.
Note
On telescopic slides with partial extension, the travel is less than the installed length. Latches in closed position.
The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used.
The load capacity specified is calculated with a slide spacing of 450 mm and is based on the maximum value with 10,000 or 80,000 cycles.
The load capacity is ca. 75% lower by horizontal mounting.
The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide.
The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used.
The load capacity specified is calculated with a slide spacing of 450 mm and is based on the maximum value with 10,000 or 80,000 cycles.
The load capacity is ca. 75% lower by horizontal mounting.
The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide.
Advantages
Latches in closed position
Suitable for flat mounting
Light running
Suitable for flat mounting
Light running
Nota importante sobre o descarregamento de modelos CAD
Para descarregar os nossos modelos CAD, é necessário iniciar sessão primeiro. Se ainda não criou uma conta, por favor registe-se em "A minha conta" (lado direito do ecrã) e siga as instruções.