Trilho telescópico extensão parcial em ambos os lados aço zincada 21334-25-0550
- Pulls out in both directions
- Latches in open position on both sides.
- Smooth running
Unidade de venda
€32.19 / unidade
+ o ICMS alemão
Adicionado ao seu carrinho de compras
Denominação
Trilho telescópico
Versão 1
extensão parcial em ambos os lados
Tipo de
produto
padrão
Material
do corpo
básico
aço
Superfície
Corpo básico
zincada
B=Largura
9,5
H=Altura
35,3
L=Comprimento
550
A
26
A1
256
A2
288
A3
480
A4
512
Capacidade de carga
por par
kg
35
Curso
S
395,3
Código do artigo do fabricante
DZ2026-0055
Montagem
Montagem lateral
Tipo de embalagem
1 peça = 1 par
UNSPSC Code
31171514
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descrição
Material
Slides steel.
Ball cages steel.
Balls, steel.
Ball cages steel.
Balls, steel.
Version
Slides galvanised.
Ball cages, galvanised.
Balls hardened.
Ball cages, galvanised.
Balls hardened.
Note for ordering
Sold in pairs.
Note
On telescopic slides with partial extension both sides, the travel is less than the installed length. Latches in open position on both sides. The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacity specified is calculated with a slide spacing of 450 mm and is based on the maximum value with 50,000 cycles.
The load capacity is ca. 75% lower by horizontal mounting.
The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide.
The load capacity is ca. 75% lower by horizontal mounting.
The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide.
Advantages
Pulls out in both directions
Latches in open position on both sides
Light running
Latches in open position on both sides
Light running
Nota importante sobre o descarregamento de modelos CAD
Para descarregar os nossos modelos CAD, é necessário iniciar sessão primeiro. Se ainda não criou uma conta, por favor registe-se em "A minha conta" (lado direito do ecrã) e siga as instruções.