Chain clamp stainless steel 22281-53-1102
- Smooth chain running
- Automatic re-adjustment
- Compensating chain elongation
- For tight spaces
- Reduced wear on chain links
Sales unit
€151.20
plus sales tax
Added to your shopping cart
Denominação
Esticador de correntes
Forma
A
Tipo
da forma
Perfil curvo
Material
do corpo
básico
aço inoxidável
Material
dos componentes
polietileno
A
11,3
B
32
Cantoneira de fixação
apropriada
22281-90-29900
Curso
de tensão
L2
40
Divisão polegada
5/8X3/8
Força de aperto
ambas as molas liberadas
(N)
190-96
Força de aperto
mola direita liberada
(N)
132-60
Força de aperto
mola esquerda liberada
(N)
58-32
Nº ISO
10 B-2
Tamanho
TS
~ CONFLICT MINERALS 3TG status
not yet identified
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
not yet identified
~ REACH SVHC-free?
not yet identified
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
not yet identified
Description
Material
Housing stainless steel.
Chain tensioner, ultra-high molecular polyethylene PE-UHMW.
Chain tensioner, ultra-high molecular polyethylene PE-UHMW.
Version
Housing bright.
Note
Ready-to-install chain tensioner for low-noise, low-wear running of ISO 606 roller chains. The TS chain tensioner is used when there is insufficient space for a conventional tensioning system. Required space under the chain is only 40 mm.
The stainless steel TS chain tensioner is available with an arched bow profile.
The TS chain tensioner has two pre-tensioned springs. They can be loosened individually and enable three different tension settings. The arrangement of the holes and slots on the housing generally facilitates installation and offers additional adjustment options for re-tensioning.
The stainless steel TS chain tensioner is available with an arched bow profile.
The TS chain tensioner has two pre-tensioned springs. They can be loosened individually and enable three different tension settings. The arrangement of the holes and slots on the housing generally facilitates installation and offers additional adjustment options for re-tensioning.
Temperature range
-20 °C to +60 °C (briefly up to +80 °C).
Assembly
The ideal mounting location is directly behind the drive sprocket, so that the length of the slack side being tensioned is kept as short as possible. Several chain links should be in contact to minimise wear.
The TS chain tensioner is supplied in a locked position. Only after installation are one or both springs released, depending on the tension required. The locking screw is released by rotating it approximately four turns.
Only the left spring released: light tension.
Only the right spring released: medium tension.
Both springs released: high tension
The TS chain tensioner is supplied in a locked position. Only after installation are one or both springs released, depending on the tension required. The locking screw is released by rotating it approximately four turns.
Only the left spring released: light tension.
Only the right spring released: medium tension.
Both springs released: high tension
Accessory
Angle brackets 22281-90.
Important note on downloading CAD models
In order to download our CAD models, you must log in first. If you have not created an account yet, please register under "My Account" (right side of the screen) and follow the instructions.
Other customers also bought
