Vibration absorber two-piece steel galvanised 26131-31831835
- Compensation of high dynamic loads
- Effective in all spatial directions
- For efficient decoupling of machines and systems to adjacent components
- Resistant to UV radiation
- Simple assembly
Unidade de venda
€16.71
+ o ICMS alemão
Adicionado ao seu carrinho de compras
Denominação
Apoio antivibratório
Versão 1
peça dupla
Material
do corpo
básico
aço
Superfície
Corpo básico
zincada
Material
dos componentes
neoprene
Cor
dos componentes
preto
D1=Diâmetro interno
9,9
D=Diâmetro externo
31,8
F (altura H2) =
carga axial
20
F1 (altura H2) =
carga radial
10
H=Altura
31,8
D2
19,8
D3
19
Dureza
Shore
35+5
Frequência Hz
(altura H2)
15
H1
12,7
H2
9,4
R
0,75
Torque Nm
(altura H2)
10
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
carbon-black extracts
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descrição
Material
Isolating medium Neoprene.
External body steel.
External body steel.
Version
Steel galvanised.
Note
The two-part vibration absorbers are used to create a stable connection or efficient decoupling of machines or equipment from neighbouring components.
Due to the material composition, rubber buffers are contact-colouring, which can lead to abrasion marks and discolouration on e.g. floors or contact surfaces.
Rubber buffers made of light grey EPDM that are not contact-colouring are available on request.
A load range of 10 to 285 kg can be covered.
Dimension H is the height of the vibration absorber when installed.
Colour coding of the products:
Yellow dot = Shore hardness 35.
Red dot = Shore hardness 45.
Green dot = Shore hardness 55.
Blue dot = Shore hardness 65.
White dot = Shore hardness 75.
Due to the material composition, rubber buffers are contact-colouring, which can lead to abrasion marks and discolouration on e.g. floors or contact surfaces.
Rubber buffers made of light grey EPDM that are not contact-colouring are available on request.
A load range of 10 to 285 kg can be covered.
Dimension H is the height of the vibration absorber when installed.
Colour coding of the products:
Yellow dot = Shore hardness 35.
Red dot = Shore hardness 45.
Green dot = Shore hardness 55.
Blue dot = Shore hardness 65.
White dot = Shore hardness 75.
Application
The lower part of the vibration absorber (P2) is pressed into the hole (D3) of the plate (P3). The plate P3 is in most cases the baseplate on which the machine or system is mounted. The upper part of the vibration absorber (P1) is then attached to the lower part (P2). The final step is to fasten the vibration absorber and the baseplate to the floor or another component using appropriate screws. It is recommended to place a washer between the upper part (P1) and the screw to protect the neoprene from the thread. Washer 07305-08 is recommended for vibration absorbers with D= 31.8 mm and washer 07305-18 is recommended for vibration absorbers with D= 47.5 mm. The vibration absorber can be screwed on both vertically and horizontally. However, the different load ratings must be taken into account.
Temperature range
-30 °C to +80 °C
Attention
- The temperature range must not be exceeded, otherwise the full function cannot be guaranteed.
- Not resistant to harsh cleaning agents, petrol and oils.
- To prevent damage to the neoprene, contact with sharp objects should be avoided.
- The height H must be maintained when installed to prevent the vibration absorber from failing.
- Not resistant to harsh cleaning agents, petrol and oils.
- To prevent damage to the neoprene, contact with sharp objects should be avoided.
- The height H must be maintained when installed to prevent the vibration absorber from failing.
Attention
The prescribed height of the baseplate/side plate used (H2/H3) should be adhered to for optimum use of the vibration absorbers.
Nota importante sobre o descarregamento de modelos CAD
Para descarregar os nossos modelos CAD, é necessário iniciar sessão primeiro. Se ainda não criou uma conta, por favor registe-se em "A minha conta" (lado direito do ecrã) e siga as instruções.
Other customers also bought
